photo sharing and upload picture albums photo forums search pictures popular photos photography help login
Stephen Gerow | all galleries >> Galleries >> Austin Healey Choke Cables > BracketSetScrews.JPG
previous | next
26-FEB-2015

BracketSetScrews.JPG

8-32 set screws added to retain the cable housings.

Panasonic Lumix DMC-FP8
1/30s f/3.3 at 5.0mm iso200 hide exif
Full EXIF Info
Date/Time26-Feb-2015 13:30:23
MakePanasonic
ModelDMC-FP8
Flash UsedNo
Focal Length5 mm
Exposure Time1/30 sec
Aperturef/3.3
ISO Equivalent200
Exposure Bias-1.00
White Balance
Metering Mode
JPEG Quality
Exposure Program
Focus Distance

other sizes: small medium original auto
comment | share
Ron Keysor 10-Mar-2015 15:18
Steve, I attached my aftermarket choke pull to the same brace you used, but I quickly realized that it might nail me in the knee in an accident. I then offset it to the right, though it is far less elaborate than your version. l disconnected the original choke (possibly not original and my car had the automatic choke) and left it in place, rolling it up and anchoring it out of the way. I know we have had some of this conversation earlier regarding adjusting the carb jets. No way I could get the original choke pull to move the carb choke mechanism. I also thought of using bicycle cable, as I am something of a road bike mechanic and have worked on high end bikes for years. A simple generic cable and housing did the trick, however.