|
|
|
|
|
|
|
| |
| 25-JAN-2009 | |
This is my end result at replicating thier plate. I don't have access to a large enough break to put the /1/2 lip on the top and bottom edge (see next two pictures) I purchased the same model disconnects except i found them on e-bay for about $25 Each, total cost for my set up was around $75
the flexi conduit and water tight fittings were purchased localy for about $5
| Full EXIF Info | |
| Date/Time | 25-Jan-2009 18:11:57 |
| Make | Canon |
| Model | Canon EOS-1Ds Mark III |
| Flash Used | No |
| Focal Length | 35 mm |
| Exposure Time | 1/80 sec |
| Aperture | f/10 |
| ISO Equivalent | 1000 |
| Exposure Bias | |
| White Balance | |
| Metering Mode | (-1) |
| JPEG Quality | |
| Exposure Program | aperture priority (3) |
| Focus Distance | |
All Images Copyright by John Kloepper
| comment | |