1978 R100/7 INSTRUMENT CLUSTER

NOTE: BEFORE REMOVING SPEEDOMETER NEEDLE, SCRATCH A MARK FOR PROPER ALIGNMENT WHEN
REASSEMBLING. THIS WILL AID IN SETTING SPEEDO NEEDLE BACK IN ITS PROPER PLACE.

WHEN INSTRUMENT CLUSTER IS REPAIRED AND INSTALLED BACK ON THE BIKE, YOU MAY WANT TO USE A GPS TO CHECK THE ACCURACY OF THE SPEEDOMETER.
IF IT'S NOT CORRECT, YOU'LL NEED TO RESET THE SPEEDOMETER NEEDLE.
IF THE SPEEDOMETER NEEDLE SEEMS TO BE LOOSE ON ITS PIN, USED A SMALL DROP OF RUBBER CEMENT TO HELP HOLD IT IN PLACE.
I CHECK AND SET THE SPEEDO NEEDLE TO THE GPS SPEED OF 60 MPH.