Full Frame displayed at full resolution

This is the first light image with my new Takahashi FSQ106EDX4 and FLI Proline16803. This was just
a quick test image with very little exposure. This is minimal processing, with no sharpening or
gradient removal, to better determine the general quality and characteristics of the new FSQ-FLI
imaging rig.

Takahashi FSQ106EDX4
FLI Proline 16803, CFW-5-7, Robofocus
LRGB = 60 28 24 20min = 2.2hrs total exposure (bin 1X1)
New Deep-Sky RGB Astronomik filters
-30C chip temp, dark frames and flats (using Aurora Flat Field Panel) applied
Focal length 530mm, FOV = 4deg X 4deg
Image scale 3.5"/pix
Guide Camera: Starlightxpress Lodestar

Comments
Data collected in one night on 23 Oct 2017, good seeing, good transparency

Equipment setup:

http://www.pbase.com/strongmanmike2002/image/166437746/original

Some links to equipment used to take this image:

StarlightXpress CCD Cameras and imaging equipment

http://www.sxccd.com/products

Finger Lakes Instrumentation CCD cameras:

http://www.flicamera.com/

Astro Shop (Aus)

http://www.astroshop.com.au/

Astro-Elecronic FS2 scope GOTO controller:

http://www.astro-electronic.de/

Gerd Neumann and Astronomik filters:

http://www.astronomik.com/en/home

http://www.gerdneumann.net/

MSB Software & Astroart 5

http://www.msb-astroart.com/

Catseye Collimation

http://www.catseyecollimation.com/

STAR Atlas:PRO planetarium software:

http://www.staratlaspro.com/