|
|
|
|
|
|
|
| |
| 14-MAY-2006 | |
A drill press is used to drill the holes through the modified T mount.
Using the old mount spacer as a guide allows very accurate hole positioning without measuring.
Only the unthreaded holes in the spacer are used to drill the four holes in the T mount.
Holes are countersunk on the camera side to receive the heads of the four reused (longer) mount screws.
| Full EXIF Info | |
| Date/Time | 14-May-2006 06:13:47 |
| Make | Minolta |
| Model | DiMAGE 7 |
| Flash Used | Yes |
| Focal Length | 42 mm |
| Exposure Time | 1/60 sec |
| Aperture | f/9.5 |
| ISO Equivalent | 200 |
| Exposure Bias | |
| White Balance | |
| Metering Mode | matrix (5) |
| JPEG Quality | (6) |
| Exposure Program | manual (1) |
| Focus Distance | |
All Images Copyright Pete Ganzel
| comment | |