_MG_1428 Using distortion for Emphasis by Digipets

Digipets | all galleries >> Galleries >> Challenges > _MG_1428 Using distortion for Emphasis


15-JUL-2008	Isabel

_MG_1428 Using distortion for Emphasis

Due to the severe contrasty light I used LucisArt Exposure to bring out shadow detail. The picture is a bit more saturated because of the filtration. I was close to the power washer because I wanted to emphasize it. Also corrected the perspective which gets quite a bit distorted with this wide of an angle (Edit/transform/distort and drag sides to correct perspective)

Canon EOS 350D ,Canon EF-S 10-22mm f/3.5-4.5 USM
1/100s f/13.0 at 10.0mm iso400 hide exif

Full EXIF Info
Date/Time	15-Jul-2008 10:55:50
Make	Canon
Model	Canon EOS DIGITAL REBEL XT
Flash Used	No
Focal Length	10 mm
Exposure Time	1/100 sec
Aperture	f/13
ISO Equivalent	400
Exposure Bias	-0.67
White Balance
Metering Mode	partial (6)
JPEG Quality
Exposure Program	aperture priority (3)
Focus Distance

other sizes: small medium large original auto

previous | next

Picture copyrighted by author - May not be used without permission

Judith Barnett		16-Jul-2008 13:20
Another job we need to do too. Nice save on this one also.

Guest		16-Jul-2008 00:24
It is not the wide angle of the lens that causes this angular distortion it is the user not holding the lens level on both the horizontal and vertical planes. I use a hot shoe bubble level to avoid introducing angular distortion, it works very well.

Guest		15-Jul-2008 21:51
Now that's exactly what I have to do after the rain finally stops here.