|
|
|
|
|
|
|
| |
| 14-DEC-2010 | |
Here the machinist is test fitting the coupling to the shaft. A soft lead mallet is used to tap it on. This is NOT pounding but a light "tap fit"... Just enough interference so it won't go on by hand is how it is done.. With a good fit you may need to heat the coupling to make the shaft slide into it when doing the install at the boat..
| Full EXIF Info | |
| Date/Time | 14-Dec-2010 13:14:59 |
| Make | Panasonic |
| Model | DMC-ZS3 |
| Flash Used | No |
| Focal Length | 12.8 mm |
| Exposure Time | 1/125 sec |
| Aperture | f/4.2 |
| ISO Equivalent | 160 |
| Exposure Bias | |
| White Balance | |
| Metering Mode | matrix (5) |
| JPEG Quality | |
| Exposure Program | program (2) |
| Focus Distance | |
© All Images property of Compass Marine Inc.