|
|
|
|
|
|
|
| |
It is important that your bearings end up in the same location as the originals but on the new shaft. To transfer this measurement I used the depth gauge on my calipers and measured from the impeller end of the shaft to the inner bearing race.
| Full EXIF Info | |
| Date/Time | 18-Mar-2009 11:20:49 |
| Make | Nikon |
| Model | NIKON D40 |
| Flash Used | No |
| Focal Length | 19 mm |
| Exposure Time | 1/60 sec |
| Aperture | f/4 |
| ISO Equivalent | 200 |
| Exposure Bias | |
| White Balance | |
| Metering Mode | matrix (5) |
| JPEG Quality | |
| Exposure Program | program (2) |
| Focus Distance | |
© All Images property of Compass Marine Inc.