 New Piers are on hold |
 On hold |
 Templates finished |
 1960s Unitron Model 166 |
 The Project |
 |
 Unitron Clock Drive |
 Unitron Clock Drive |
 Unitron Clock Drive |
 Unitron replica project |
 EQ adapter on pier |
 Unitron replica project |
 Unitron replica project |
 Unitron replica project |
 Unitron replica project |
 |
 Grinding the corners |
 Rounding the bottom |
 Polishing the edges |
 |
 |
 Just about ready for the primer |
 Primer |
 |
 Optical Center Punch |
 Drilling |
 Countersinking |
 Tapping |
 Installing the Doors |
 Door hinges |
 Doors almost finished |
 Doors and door knobs installed |
 Doors and door knobs installed |
 Doors and door knobs installed |
 CAD model of Clock drive tray |
 Clock Drive Tray stock |
 Silicon bronze TIG filler rod |
 Clock drive tray |
 |
 Clock drive tray - milling pocket for felt |
 Clock drive tray - milling pocket for felt |
 |
 Revised Clock Drive Tray |
 Clock drive tray installed |
 CAD model of EQ adapter |
 |
 Center drilling and tapping level spacers |
 Drilling Levels |
 Working on the EQ adapter levels |
 Levels disassembled |
 Levels completed |
 Turning the EQ adapter |
 Center punching the base adapter CAD layout |
 Scribing the layout |
 Milling the EQ Base adapter |
 Milling the EQ Base adapter |
 |
 Milling the EQ Base adapter |
 Milling the EQ Base adapter |
 Milling the EQ Base adapter |
 Milling the EQ Base adapter |
 Milling the EQ Base adapter |
 Milling the EQ Base adapter |
 Milling the EQ Base adapter |
 Milling the EQ Base adapter |
 Milling the EQ Base adapter |
 Milling the radius the EQ Base adapter |
 Milling the EQ Base adapter pocket |
 Milling the EQ Base adapter pocket |
 Milling the EQ Base adapter pocket |
 Milling the EQ Base adapter pocket |
 Bore finished |
 Bore finished |
 Da' Stock |
 |
 |
 |
 |
 |
 Clock drive pulley model |
 Groove for cable |
 Pocket for bearing |
 Boring hole for shaft |
 Almost finished |
 Assembled pulley |
 Replica pulley - Original pulley |
 Ouch - thumb in the chuck! |
 Pulley assembly installed |
 Door and clock drive tray for 5 inch pier |
 Pocket milled in back of 5 inch pier door |
 Finished Door (primer only) |
 Hinge Pocket |
 Replica closure spring (phosphor bronze) |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 Phosphor bronze |
 |
 |