|
|
|
|
|
|
|
| |
| 10-AUG-2006 | |
Rotate the outer floating element tube so that the access holes line up with the iris set screws. Repeat for the other two set screws.
Use a properly sized slotted driver as the screws are easily damaged and are usually very tight.
The iris will then come out from the front of the floating element body (in pieces).
| Full EXIF Info | |
| Date/Time | 10-Aug-2006 17:44:54 |
| Make | Konica-Minolta |
| Model | MAXXUM 7D |
| Flash Used | Yes |
| Focal Length | 100 mm |
| Exposure Time | 1/60 sec |
| Aperture | f/6.7 |
| ISO Equivalent | 200 |
| Exposure Bias | -0.33 |
| White Balance | daylight (1) |
| Metering Mode | matrix (5) |
| JPEG Quality | (6) |
| Exposure Program | aperture priority (3) |
| Focus Distance | |
All Images Copyright Pete Ganzel
| comment | |