Macro Pin Shims 2660.jpg by Pete Ganzel

Pete Ganzel | all galleries >> Tinkering >> Disassembly of the Maxxum 70-210 f/4 Beercan Lens > Macro Pin Shims 2660.jpg

previous | next


26-NOV-2004

Macro Pin Shims 2660.jpg

Remove the rear half of the lens assembly.
Watch for the little spring and macro pin.
Make note of shims, they only fit on one way, there is an extra hole on one side for the macro pin.

Minolta DiMAGE 7
1/125s f/9.5 at 50.3mm iso100 with Flash hide exif

Full EXIF Info
Date/Time	26-Nov-2004 17:18:39
Make	Minolta
Model	DiMAGE 7
Flash Used	Yes
Focal Length	50.3 mm
Exposure Time	1/125 sec
Aperture	f/9.5
ISO Equivalent	100
Exposure Bias
White Balance	daylight (1)
Metering Mode	matrix (5)
JPEG Quality	(6)
Exposure Program	manual (1)
Focus Distance

other sizes: small medium original auto

previous | next

All Images Copyright Pete Ganzel

comment |

Vladimir		19-Apr-2009 10:22
Hi, Pete! Will you explain the function of macro pin? I mean, what happens when it shorts the contacts, other words what changes in working mode of the lens? And what happens if I remove it?

Type your message and click Add Comment

It is best to login or register first but you may post as a guest. Enter an optional name and contact email address. Name
Name Email
help	private comment