|
|
|
|
|
|
|
| |
OK I wanted to test the strength of the adhesive lined heat shrink to decipher it's added benefit in overall total joint strength.
To do this I striped the wire as I would normally do then instead of crimping the butt connector I simply applied heat and melted the adhesive lined heat shrink around the wires jacket.
This photo shows the actual connection that I used in the photo below.
| Full EXIF Info | |
| Date/Time | 24-Feb-2008 21:43:50 |
| Make | Nikon |
| Model | NIKON D200 |
| Flash Used | No |
| Focal Length | 70 mm |
| Exposure Time | 1/60 sec |
| Aperture | f/5.6 |
| ISO Equivalent | 400 |
| Exposure Bias | |
| White Balance | |
| Metering Mode | matrix (5) |
| JPEG Quality | |
| Exposure Program | program (2) |
| Focus Distance | |
© All Images property of Compass Marine Inc.