|
|
|
|
|
|
|
| |
| 23-JAN-2010 | |
When using a veneer you'll want sharp blades and clean cuts. I used a 40 tooth thin kerf Freud blade in my table saw, for expensive plywood though I rip with an 80 tooth, and I used an 80 tooth Freud blade in my chop saw for cross cutting.
| Full EXIF Info | |
| Date/Time | 23-Jan-2010 13:41:57 |
| Make | Nikon |
| Model | NIKON D200 |
| Flash Used | No |
| Focal Length | 85 mm |
| Exposure Time | 1/60 sec |
| Aperture | f/8 |
| ISO Equivalent | 1250 |
| Exposure Bias | |
| White Balance | |
| Metering Mode | center weighted (2) |
| JPEG Quality | |
| Exposure Program | program (2) |
| Focus Distance | |
© All Images property of Compass Marine Inc.