|
|
|
|
|
|
|
| |
This task is perhaps the most difficult of the entire process. The bearings need to be pressed onto the shaft and it's a very tight fit.
I used an old trick I taught to me years ago for doing just this sort of thing. I simply heated the bearings, in the toaster over (my wife doesn't know I cook bearings..), to 200F. At the same time I had the shaft in the freezer.
*******CLICK BELOW FOR PAGE 2*******
| Full EXIF Info | |
| Date/Time | 17-Mar-2009 23:08:04 |
| Make | Nikon |
| Model | NIKON D40 |
| Flash Used | No |
| Focal Length | 26 mm |
| Exposure Time | 1/60 sec |
| Aperture | f/4.2 |
| ISO Equivalent | 200 |
| Exposure Bias | |
| White Balance | |
| Metering Mode | matrix (5) |
| JPEG Quality | |
| Exposure Program | program (2) |
| Focus Distance | |
© All Images property of Compass Marine Inc.
| Durell | 11-Mar-2010 00:14 | |