|
|
|
|
|
|
|
| |
| 20-JUL-2008 | |
Step #9 When using a jig saw tape the entire face of the NavPod with blue tape to prevent marring of the surface. Also use a HIGH quality jig saw such as a Bosch. While I'm as big a fan of cheap tools as anyone this is NO PLACE for a cheap jig saw.
I would not ever consider using my Ryobi (pictured on right) to perform this task as it is far from accurate. Poor quality tools can make or break a project.
| Full EXIF Info | |
| Date/Time | 20-Jul-2008 17:18:56 |
| Make | Nikon |
| Model | NIKON D40 |
| Flash Used | No |
| Focal Length | 26 mm |
| Exposure Time | 1/60 sec |
| Aperture | f/4 |
| ISO Equivalent | 200 |
| Exposure Bias | |
| White Balance | |
| Metering Mode | matrix (5) |
| JPEG Quality | |
| Exposure Program | program (2) |
| Focus Distance | |
© All Images property of Compass Marine Inc.