Another view of the tilted boat on the trailer. you can see the single winch post (in front of the left wheel) and one of the swing out arms just behind the left wheel. This arm has some high density foam padding on it and works quite nicely to protect the hull surface. I will be making some mods here...adding a wooden 2x6 section along the top of the arm on which the padding will be attached. This will give greater surface area for the weight of the hull to rest on. The 2x6 will also be able to flex slight at the attachment to the arm...allowing for nice alignment with the keel line in the contact zone. The rear mast support is noticeably shorter than we initially made it...in order for the mast & diamond spreader arms to clear the dolphin striker & strap. The license plate is a bit to close and does scrape occasionally. Will reposition it to the wheel fender and add a light to it.