photo sharing and upload picture albums photo forums search pictures popular photos photography help login
Compass Marine How To | all galleries >> Welcome To MarineHowTo.com >> Seacock & Thru-Hull Primer/Pre Information > Thread Depth of 1" Thru-Hull
previous | next
12-JAN-2008

Thread Depth of 1" Thru-Hull

This photo shows exactly how deep the threads are cut into the the 1" thru-hull pictured above. The threads are 1.45mm deep on this thru-hull fitting.


If you subtract the 1.45mm thread cut from the 2.99mm overall thickness you get the remaining nominal wall thickness of 1.54 millimeters.


Yes, you read it correctly, the nominal wall thickness on this very popular Apollo 1" bronze thru-hull fitting is roughly the thickness of an average penny at only 1.54 millimeters.

Nikon D200
1/60s f/4.0 at 70.0mm iso100 full exif

other sizes: small medium large auto
share