Wiring:
GND = House Bank Negative Terminal
B1+ = House Bank Positive Terminal (FUSED within 7" of battery bank)
B2+ = Start/AUX Battery Positive Terminal
Relay / Alarm Connections:
The Smart Gauge also has the ability to drive external relays, alarms etc.. There are many uses for the relay ports and it offers many programing choices for the relay driving terminals.
NO = Normally Open Relay Terminal
COM = Neg Relay Terminal
NC = Normally Closed Relay Terminal
IMPORTANT NOTE: The max permissible load on any of the relay terminals is 500mA or 0.5A. If you need to drive more current, an external relay/contactor, with coil loads under 500mA, needs to be used. The maximum voltage across any of the alarm terminals is 48V...