photo sharing and upload picture albums photo forums search pictures popular photos photography help login
Compass Marine How To | all galleries >> Compass Marine How To Articles >> PSS Shaft Seal Installation > DO NOT OVER TIGHTEN
previous | next
DO NOT OVER TIGHTEN
09-Mar-05

DO NOT OVER TIGHTEN

Please DO NOT over tighten the draw bolts. This boater was very lucky he broke the shaft flange and not the gear box flange. Despite his gear box flange not breaking, it is now severely OUT OF TRUE. The only way to fix this is with a rebuild.


Despite it not breaking it still cost $1750.00 to fix the BENT gear box output flange which required a re-build of the gear box. Remember these flanges are going to be aligned to 0.003" when you put her back together. It does NOT take a lot of force to bent the output flange by 0.003".

If the coupling won't come off you can cut the coupling just over the key way as seen in this photo. Creating the cut at the key way will ensure that you don't damage the shaft. One cut it will relieve the pressure and the coupling will then come off.


If you can't get an angle grinder in there to cut the coupling you may need to cut the shaft. Not all couplings will come off so PLEASE don't ruin your transmission in the process.

Panasonic Lumix DMC-ZS3
1/60s f/4.0 at 4.1mm iso100 hide exif
Full EXIF Info
Date/Time27-May-2010 09:53:30
MakePanasonic
ModelDMC-ZS3
Flash UsedNo
Focal Length4.1 mm
Exposure Time1/60 sec
Aperturef/4
ISO Equivalent100
Exposure Bias
White Balance
Metering Modematrix (5)
JPEG Quality
Exposure Programprogram (2)
Focus Distance

other sizes: small medium large original
comment | share