photo sharing and upload picture albums photo forums search pictures popular photos photography help login
Type your message and click Add Comment
It is best to login or register first but you may post as a guest.
Enter an optional name and contact email address. Name
Name Email
help private comment
Compass Marine How To | all galleries >> Compass Marine How To Articles >> Universal Diesel M-25 Alternator Upgrade > Crude Wiring Diagram
previous | next
Crude Wiring Diagram
08-MAR-1998

Crude Wiring Diagram

Romper room is my style here unfortunately it's the only way I knew how to label stuff in the early days of digital cameras.


In the picture you can see the 6 gauge jumper wire from the hot output of the alternator to the starter post. I actually prefer to direct wire the alt to the house bank but for this installation going to the "C" post of the battery switch, via the starter wire was perfectly fine. By sizing this wire appropriately you can better achieve a non restricted output. From the factory this wire was 12 gauge. Be sure to put a good strain loop so you don't weaken the terminations and allow for enough flex.

Olympus C-2040Z
1/25s f/1.8 at 7.3mm iso146 full exif

other sizes: small medium large
comment | share