UPDATE: 3/21/2014 - Always on the march to make Bed-It Tape the absolute best product it can be I made a change to the release paper I was using. I spent a good deal of time and money to come up with the best release paper I could for use with Bed-It Tape. The new release paper is white and is a significant upgrade from the old release paper. Even multiple years out Bed-It should still peel away cleanly.
ABOUT BED-IT TAPE:
Bed-It Tape is specifically formulated and extruded for the installation of deck fittings to the decks of boats. All aspects of the installation procedure and necessary formulation requirements have been brought together in a marine specific bedding tape.
It has been designed to:
*Work across wide temperature ranges with minimal "creep" or cold flow even in hot climates
*Formulated to have exceptional tolerance to withstand slight movement between deck and fitting
*Stand up to typical boat washing chemicals
*Stick to the parts not your fingers
*Have the proper density for use in a "compression" application.
*Have right density to allow it to displace from under the fitting in a reasonable time frame
Bed-It Tape is made only from the finest materials and has been designed to exceed the quality of pre EPA tapes that have lasted for 30+ years..
Bed-It Tape is not an RV, Masonsry, HVAC or glazing product it was specifically formulated for use in bedding deck hardware.
Bed-It Tape is made in the USA with US labor and creates US jobs!!