photo sharing and upload picture albums photo forums search pictures popular photos photography help login
Type your message and click Add Comment
It is best to login or register first but you may post as a guest.
Enter an optional name and contact email address. Name
Name Email
help private comment
Compass Marine How To | all galleries >> Welcome To >> Anchor Scope Illustrated > 1:1 Scope
previous | next
1:1 Scope

1:1 Scope

Here we go. This is what a 1:1 scope looks like if you did not include the length of the anchor shank. As mentioned earlier this aluminum shank represents the length of my 35 pound CQR to scale. A true 1:1 would be vertical but the extra length allows some angle to the scope.

Scope is figured as 1 times the depth from your bow chock to the ocean floor. So for a 5:1 scope with 10 feet to your bow from the bottom you'd need 50' of rode or 5 X 10' = 50'. 7:1 would be 7 X 10' = 70' of rode. If your depth transducer is 1' below water and not calibrated for offset don't forget to add this into the calculation. Forgetting to add in bow height is most common and can make a fairly big difference if you leave it out.

other sizes: small medium large
comment | share