photo sharing and upload picture albums photo forums search pictures popular photos photography help login
Type your message and click Add Comment
It is best to login or register first but you may post as a guest.
Enter an optional name and contact email address. Name
Name Email
help private comment
Compass Marine How To | all galleries >> Compass Marine How To Articles >> New Depth Sounder With An Old Transducer > Install Possitive Wire Heat Shrink
previous | next
Install Possitive Wire Heat Shrink
15-MAY-2010

Install Possitive Wire Heat Shrink



STEP #6 - When the negative/return wire is done strip a little off the end of the main conductor to fit a terminal. Next wrap the main conductor with aluminum foil, this replaces the shield you just removed, and slide some red heat shrink over it. Now hit it with the heat gun and shrink it.

Nikon D200
1/250s f/11.0 at 52.0mm iso1250 full exif

other sizes: small medium large
comment | share
ottos 31-Jan-2014 14:33
MS...One question on the aluminum foil. For it to act as a shield, it needs to contact the shield/negative braid, correct?