photo sharing and upload picture albums photo forums search pictures popular photos photography help login
Compass Marine How To | all galleries >> Compass Marine How To Articles >> Seacock Backing Plates / Alternate Method / No Through Bolts > Install Flange or Seacock
previous | next
Install Flange or Seacock
09-APR-2009

Install Flange or Seacock

Once the studs are in simply drop the flange over it put on the nuts. You're now ready for a dry test fit in the hull.



*******PLEASE CLICK BELOW FOR PAGE 2*******

Nikon D200
1/60s f/11.0 at 48.0mm iso560 full exif

other sizes: small medium large
comment | share
Rob 06-Nov-2013 21:18
I have used this method with two variations. After laying up the backing plate I cover the uncured layup with cellophane and set the flange on top. The weight of the flange creates an imprint into the backing plate that the flange then fits snugly into when cured and further restricts rotation. I have also tapped from the bottom of the backing plate set hex head bolts in epoxy. Use a router but to counter sink for the hex head. Now the bolt can't be pulled through.
Michael 09-May-2011 21:41
You may want to make your studs long enough so that you can get two nuts on it with the flange installed. This will give you the option to remove the studs and screw off the sea cock, in case you are unable to remove the thru Hull from the bottom.
sean 31-Jan-2010 06:32
great idea as it seems you can pe-fab your flanges and plate smuch more accurately "dry" then epoxy attach to the hull cmbined with the thread strength of the through hull.Got to be equal if not a superior method than the hull bolted method? given the increased accuarcy, and less holes ct through the hull!?