photo sharing and upload picture albums photo forums search pictures popular photos photography help login
Type your message and click Add Comment
It is best to login or register first but you may post as a guest.
Enter an optional name and contact email address. Name
Name Email
help private comment
Compass Marine How To | all galleries >> Welcome To >> Rebuilding A Westerbeke Alternator > Re-Assembly
previous | next


The first step with an alternator like this one is to retain the brushes, as you saw above. You then line up, and slide, the stator/regulator assembly back into the rear case being very careful to make the brush retaining brad nail slide into the small hole in the rear case.

Sometimes a Sharpie marker is a good way to mark both the stator and the case so you know how they line up & go back together.

Don't forget to re-install the three gray screws before installing the rotor, or what ever holds your stator/regulator assembly is held in place.

Nikon D40
1/60s f/5.6 at 55.0mm iso200 full exif

other sizes: small medium large
comment | share