photo sharing and upload picture albums photo forums search pictures popular photos photography help login
Type your message and click Add Comment
It is best to login or register first but you may post as a guest.
Enter an optional name and contact email address. Name
Name Email
help private comment
Compass Marine | all galleries >> Compass Marine "How To" Articles >> Changing A Raw Water Pump Impeller > Check The Pump Body
previous | next
Check The Pump Body
23-JUL-2008

Check The Pump Body

Don't forget to check the pump body for both wear and debris. Run your finger around the inside to feel for groves or rough spots and give it a good visual inspection.


Once you have done this apply some impeller lube to your finger and lube up the inside surfaces of the pump body including the back wall as it is part of the impellers sealing surface and the impeller spins on it as it does the front cover. Both the rear of the pump and the cover plate should be lubed before final assembly or insertion of the impeller.

Nikon D200
1/60s f/4.0 at 24.0mm iso100 full exif

other sizes: small medium large
comment | share