In a nutshell this shot pretty much summarizes what got done on Day 4. It's also a *much* better
photo of the custom drilling guide. In addition to drilling all the shelf pin holes in the sides
tonite (it's much easier to drill these before assembling the case!) I also cut the rabbets along the
edges of the case sides and on the top and bottom sections. The rabbets on the sides will accept
the plywood back panel. Everything is now milled and ready for a dry fit and glue up. That's tomorrow night.

Weeknights are short work sessions, usually no more than 3 hrs. It keeps a quiet neighborhood quiet. :)