3D crossview picture.
First 3D pictures of the adjusted setup for the waterfigures 2010. After a lot of technical problems. A bug into the last new software 9.1 version for the Altera compiler. This took me a full day to recover 3 faulty DE1 boards. Now I found via the Altera forum the cause and all the boards works again.
This picture is noting special, but is the result of adjusting several timers and hardware. Also the synchronisation of the 2 cameras is added and works perfect.
This picture show a highspeed projectile that come from the left side and 2 little "LEGO" pieces floating into the air. The setup is now ready for the real work next week.
D300 + D200 Nikon DSLR camera.
Camera space 120mm.
Macro lenses 2 x Nikor AF105/2.8D micro.
Frame real live size : 100mm
F29 diafragma, manual bulb shutter mode.
2 Flashes SB-80-DX TTL controlled by the central hardware controller.
1 DE1 FPGA cyclone II mainboard at 50MHz clock.
Digital waveforms into a flash at high speed PWM, digital powercontrol, frequentie control and type waveform.
2 laser detector systems.
1 magnet current gun for the projectile at 150V 10A 4msec activation 840uF/330V capacity (flash type capacity).
Projectile 4mm x 20mm.
How to see 3D photos: