Canon 10D Disassembly Project Photo Gallery by Stephen Reed at pbase.com

Canon 10D Disassembly Project

This gallery is chronicling via images the disassembly of the 10D. This 10D unit has broken CF pins, so my mission is to replace this assembly.
I must wait for the parts to arrive from Canon before I start this project.

PICT0609.jpg	PICT0611.jpg	PICT0613.jpg	PICT0615.jpg
PICT0619.jpg	PICT0621.jpg	PICT0622.jpg	meter.jpg
PICT0609.jpg	PICT0624.jpg	PICT0625.jpg	PICT0626.jpg
PICT0628.jpg	PICT0629.jpg	PICT0630.jpg	PICT0631.jpg
PICT0632.jpg	PICT0633.jpg	PICT0634.jpg	PICT0635.jpg
PICT0638.jpg	PICT0639.jpg	PICT0640.jpg	PICT0641.jpg
PICT0642.jpg	PICT0643.jpg	PICT0645.jpg	PICT0646.jpg
PICT0647.jpg	Completed 10D	Sample image from completed 10D

comment

Niels Maneschijn		21-Apr-2009 21:32
Thanks for the photo's! They've been most helpful replacing my shutter. This turned out to be a huge undertaking. How they got the shutter flatcable in its place in the factory is beyond me. Eventually I nailed it though. I also replaced the shutter release button. This is also not as easy as it looks, being under other prints. The end result is satisfactory. Only one screw was left over at the end. :) A word or two of caution: 1) Never touch the flash circuitry (colored wires to the left) when the capacitor is loaded. 2) Never ever try to discharge the cap using a screwdriver, unless you like to bust your ears. There's a brutal amount of energy stored in that thing. Oh and try not to short circuit something when bolting the cover back on, it might cost you hours to find out what happened. Funny thing is, I might never know if it was a shutter malfunction at all, or another minor defect which got accidentally fixed in the process.

Niels Maneschijn		20-Apr-2009 22:49
Thanks for the photo's! They've been most helpful replacing my shutter. This turned out to be a huge undertaking. How they got the shutter flatcable in its place in the factory is beyond me. Eventually I nailed it though. I also replaced the shutter release button. This is also not as easy as it looks, being under other prints. The end result is satisfactory. Only one screw was left over at the end. :) A word or two of caution: 1) Never touch the flash circuitry (colored wires to the left) when the capacitor is loaded. 2) Never ever try to discharge the cap using a screwdriver, unless you like to bust your ears. There's a brutal amount of energy stored in that thing. Oh and try not to short circuit something when bolting the cover back on, it might cost you hours to find out what happened. Funny thing is, I might never know if it was a shutter malfunction at all, or another minor defect which got accidentally fixed in the process.

Guest		13-Dec-2006 07:25
This really makes me want to do an IR conversion on my 10D.

Ingo R.		09-Mar-2006 21:41
Ich bin begeistert! Endlich jemand der sich traut und endlich jemand, der dass dann auch noch dokumentiert ;-) �:::P:::� �:::E:::� �:::R:::� �:::F:::� �:::E:::� �:::K:::� �:::T:::� �:::S:::� �:::U:::� �:::P:::� �:::E:::� �:::R:::�

Peter T. Schwenn		27-Aug-2005 15:15
Dear Stephen, To get to "613" from "611" (step 2 to 3 = back-panel removed,) there are visible the four now empty screw holes: two on the "left" (of PICT0613.jpg) in a vertical "column", and one on each side of the finder. What holds the "right" side, if anything? (I have those 4 visible screws out, and am wondering whether there are more or whether I just need to wiggle and lift to get the "right" side loose.) This is a wonderful thing you have done for all us 10D owners. My CF card slot doesn't work (EVERYTHING else does; e.g. I can take pictures if I remote capture over the USB cable). Repair quotes are high on the repair, so that one would be better off getting a 20D. My CF pins look fine but I thought I'd dissassemble, progressively, looking for electrical, moisture or mechanical faults relative to the CF. Again thank you for the excellent photo series. Peter Schwenn www.schwenn.com

Ken Croft		30-Jun-2005 12:16
I see from the picture of the Minolta D7 that you are also an aeromodeller. Me too; that explains your expertise. Well done. I too have a 10D but I doubt I will take it apart. Cheers ken croft, north yorks

Arch		24-May-2005 02:28
I jast know that my 10D has SONY monitor inside! The same as Cyber Shot camera :-)

Arch		24-May-2005 02:25
For me, it's not just only screw left over, some electrical wires left also! The IR filter is fantastic looks, Thanks man!

Guest		23-May-2005 22:25
Thanks for doing this. Now I am sure I will never open my 10D I will just have to give it to guys like you. ;o)

Tim Rucci		23-May-2005 14:07
Stephen, Thanks for sharing this rare look inside the 10D. I have been following your thread on DPR, and I will be checking back to see the progress. It's hard to imagine all this packed into the camera body. I am about to clean my 10D sensor for the first time, and I was looking at your photos with interest, wanting to see the actual anti-aliasing filter and sensor. You are one brave soul. I'm glad to hear that you have experience with this sort of thing, after seeing the photos and imagining 'myself' trying to get it all to fit back inside again, and actually work. I suppose you are making careful notes on what connections you unsoldered, so that you can get it all put back. I might add that these photos are excellent. Thanks so much for posting all this. I can't wait to see more... ~Tim

Ian Morehouse		23-May-2005 08:50
Read your DPReview thread. I usaed to be able to get them this far, but they would never go back together again. I would always have some screws left over. Good luck and thank you for taking the time to show.

Guest		23-May-2005 05:52
Good luck!

click on thumbnails for full image