photo sharing and upload picture albums photo forums search pictures popular photos photography help login
Type your message and click Add Comment
It is best to login or register first but you may post as a guest.
Enter an optional name and contact email address. Name
Name Email
help private comment
CJ Max | all galleries >> V-Drum Sander > V-Drum Sander - 16 - Second Coat of Glossy
previous | next
V-Drum Sander - 16 - Second Coat of Glossy
29-MAY-2013 Cliff. Johnston

V-Drum Sander - 16 - Second Coat of Glossy

Pearland, Texas

After much searching of the internet and reading I decided to put 2 coats of an oil-based paint on the drum. I shall also be sealing the ends of the MDF drum. The product that I used with a brush is Glidden Trim & Door Ultra High Gloss - with Gel-Flow Technology. I must say that I am impressed with this paint. It went on fairly easily, gave good coverage and dried very smoothly. I did sand between coats with 400 grit sandpaper. This image was taken about 30 minutes after applying the second coat. It is not dry. I will let it dry for 72 hours before doing anything more with it.

Why do I wind the end of the power cord with red tape? Just to let me know quickly where it is in dim light and to be careful! It's something that I started doing years ago when my first shop area lighting was very poor. I cut a power cord one day because I couldn't see it properly - got a big surprise there ;-) So I wrapped it with red electrical tape - haven't made that same mistake again...

LG LG-VS700
0.00s at 4.3mm iso50 full exif

other sizes: small medium large original
comment | share