|
|
|
|
|
|
|
| |
| 23-Feb-2015 | David Adams |
Here I'm forming a trim piece for behind the pilot seat.
I made a wood form to match the curved tube that the piece fits over, then fashion the aluminum over it.
The aluminum is sandwiched between a the form and another similar shaped piece to keep it from moving, and deforming where I don't want it to.
I use a scrap of wood that has been rounded where it contacts the metal as a tapping block.
This way I don't leave pecker (hammer) tracks on the piece that are difficult to remove.
| Full EXIF Info | |
| Date/Time | 23-Feb-2015 19:45:54 |
| Make | Canon |
| Model | Canon EOS 6D |
| Flash Used | No |
| Focal Length | 22 mm |
| Exposure Time | 1/100 sec |
| Aperture | f/8 |
| ISO Equivalent | 8000 |
| Exposure Bias | 0.00 |
| White Balance | 0 |
| Metering Mode | partial (6) |
| JPEG Quality | |
| Exposure Program | program (1) |
| Focus Distance | |
All Images © David R. Adams (Except where noted.)